How to Remove, Reseat, or Replace the Battery in a Wii U GamePad
Wii U
In this article, you'll learn how to replace the battery in a Wii U GamePad.
Important
- Turn the power off and disconnect the AC Adapter if it is connected to the controller.
- Use a crosshead style, size #0 screwdriver to avoid damage to the screw or threads.
Note
- The Wii U GamePad uses a standard-capacity battery, model No. WUP-012.
- The Wii U GamePad high-capacity battery can also be used, model No. WUP-013.
Complete these steps
- Press and hold the POWER Button for at least one second to turn off the power.
- Loosen the battery cover screws with a crosshead style, size #0 screwdriver.
- The battery cover is designed so the screws can be loosened, but not fully removed.
- Remove the battery cover by lifting the edge slightly, and then removing it outward.
- Unplug the connector first, and then remove the battery by pulling it outward.
- When disconnecting the battery cable, pull by the plug, not the cable.
- After 10 seconds, insert the new battery (or the old battery if you are reseating it).
- Replace the battery cover and tighten the two screws, being careful not to over tighten them.
