Alarm Stops Unexpectedly On Nintendo Sound Clock: Alarmo

What to do

• Check the position of the device
  1. Check that you’re on the most current system update.
  2. Confirm that the surface that device sits on is level.
  3. Check that the device is within 20in/50cm from the edge of the bed.
     • Nintendo Sound Clock: Alarmo is intended to work with bed sizes Twin through King. Larger or non-standard size beds may cause the device to not work as intended.
     • Alarmo is also intended to work best with one user. Additional people, or pets, in the bed may cause the device to not work as intended.
  4. Check that the device is no higher than 8in/20cm above the bed.
• Reconfigure the sensor zone
  1. Open the Menu by pressing the Confirm Button once.
  2. Turn the dial to find the Settings screen.
  3. Press the Confirm Button.
  4. Turn the dial to find the Sensor Zone screen.
  5. Press the Confirm Button.
  6. Follow the prompts to configure the device layout and update the sensor zone.
• Check sensor zone for moving objects
  1. Open the Menu by pressing the Confirm Button once.
  2. Turn the dial to find the Help screen.
  3. Press the Confirm Button.
  4. Turn the dial to find the Check Sensor Zone screen.
  5. Press the Confirm Button to start the check.
     • If it passes the check, no moving objects were found in the sensor zone.
     • If it fails the check, a moving object was found in the sensor zone and it likely is what’s preventing the alarm from functioning properly. Remove the moving object and run the check again.
• Test the alarm

  Test your alarm to confirm it’s functioning as expected. We recommend that you set a new alarm in the near future to test that the alarm is functioning properly and then set it back to your preferred time after the test.