Skip Navigation

How to Start a New Game (Ring Fit Adventure)

Nintendo Switch 2, Nintendo Switch, Nintendo Switch Lite, Nintendo Switch - OLED Model

Follow these steps to set up Ring Fit Adventure for the first time.

Note: The first time you start the game, a tutorial video will walk you through how to set up the game and accessories.

Complete these steps

  1. Launch Ring Fit Adventure from the HOME Menu.
  2. Remove the Joy-Con (L) when prompted, then press any button.
  3. Insert the Joy-Con (L) into the leg strap pocket with the control stick at the top, facing outward.
  4. Wrap the leg strap around your left thigh (don’t over-tighten). Stand still until the game registers that the strap is in place.
  5. Remove the Joy-Con (R) when prompted, then press any button.
  6. Align the (+) symbols on the Joy-Con (R) and the Ring-Con, then slide the Joy-Con (R) into the rail on the Ring-Con until you hear a click.
  7. Place the Ring-Con on a flat surface to calibrate. (Don’t touch it until it finishes!)
  8. When prompted, pick up the Ring-Con by the two grips on the sides, and press them inwards.
  9. Use the Control Stick on the Joy-Con (R) to highlight your preferred distance measurement - Outside Canada (distance in miles) or Canada (distance in kilometers). Squeeze the Ring-Con twice to confirm.
    • Weight is measured in pounds with either choice.
    • This can be changed later from the title screen.
  10. When prompted, squeeze the Ring-Con in and hold until “START!” appears on the screen.
  11. Review the Ring-Con Basic controls, then squeeze the Ring-Con to continue.
  12. Review the Health and Safety information, then squeeze the Ring-Con to continue.
  13. Tilt the Ring-Con to highlight the mode you want to play (Adventure, Quick Play, Custom, or Multitask Mode), then squeeze the Ring-Con to begin!

Was this helpful?