Skip Navigation

Error Code: 007-0200

Nintendo 3DS

The information in this article can help you when:

  • You are unable to connect to the Nintendo eShop.
  • You received the error message “Could not access the SD Card.”
  • An SD Card in not inserted correctly or is write-protected.

What to do

In order to perform these steps on a New Nintendo 3DS XL, you will need a size #0 crosshead head screwdriver to remove the battery cover. You must remove the battery cover to access the microSD card.

  1. Make sure the system is off and remove the SD card.
  2. Check the SD card and ensure it is unlocked.
    • microSD cards do not have a lock switch and cannot be locked.
  3. Insert the SD card and turn the system on.
  4. Attempt to connect to the Nintendo eShop again.

Situation not resolved

  • Try another SD card or try the SD card in another Nintendo 3DS family system.
  • If another SD card works or the SD card does not work in another system, the SD card should be replaced. These replacements are available through Nintendo Store.
  • If another SD card does not work or the SD card works in another system, the system and SD card should be sent in for service.
  • If another SD card or system is not available, the system and SD card should be sent in for service.

The following systems are available for service from Nintendo:

  • New Nintendo 2DS XL - Serial numbers begin with "NW"

For your convenience, Nintendo provides a quick and easy-to-use online service request process.

Was this helpful?