How to Set Up the Super NES Classic Edition

Complete these steps

1. Open the front cover of the control deck by hooking your fingers below the cover and gently pulling up, then connect the Super NES Classic Controller (model No. CLV-202) to port No. 1 on the front of the control deck.
   • Control port No. 1 is the one on the left side and is marked by a small dot. Control port No. 2 is the one on the right side and is marked by two small dots.
   • You can also use a compatible controller.
2. Connect the included USB type-A cable into the AC adapter block (model No. CLV-003) and the other end of the cable (USB type-microB) into the DC IN jack on the back of the control deck. Then plug the AC adapter into a wall outlet.

   Important: If your system did not include an AC adapter that you can use, you may find our information on Is There an AC Adapter That I Can Use in My Country? helpful.

3. Connect one end of the HDMI cable to an available HDMI port on your television or monitor, and the other end to the HDMI OUT port on the back of the control deck.
4. Ensure the control deck is placed on a flat, solid surface, then slide the Power switch to the ON position.
   
5. Power on your television or monitor and select the correct HDMI input.