Skip Navigation

Error Code: 2110-2979

Nintendo Switch 2, Nintendo Switch, Nintendo Switch - OLED Model

Steps for when you are unable to connect your Nintendo Switch 2 or Nintendo Switch console to a wired or wireless network and receive the error code 2110-2979.

Note
  • This error code indicates there was an IP address conflict between the console and another device on the network.
  • This can occur if you assigned an IP address to the Nintendo Switch 2 or Nintendo Switch that was already assigned to another device on the network, such as another gaming console, a PC, or a laptop.

Possible solutions

Test your connection after any changes are made to the console or network environment to determine if the change resolves your issue.

  • Update the IP address within the console's Internet settings to an alternate, valid IP address.
    • How to manually enter IP address settings on Nintendo Switch
      On a PC or smart device
      1. Using a device on your network (PC, laptop, smart device, etc.), locate the following network information:
        • IP Address
        • Subnet Mask
        • Gateway
      On the Nintendo Switch console
      1. From the Advanced Settings page of your network connection's settings, select IP Address Settings.
      2. Select Manual.
        The IP Address option selected from the Network Settings screen on Nintendo Switch
      3. Select IP Address and then hold down the B Button to delete the existing IP address (it defaults to zeros).
      4. Enter the IP address you found on the network device, but add 20 to the last section of digits, and then select OK.
        • As an example, if your computer's IP address displays as 192.168.2.5, enter 192.168.2.25 on the Nintendo Switch.
          Important: Every device on a network must have a different, unique IP address.
      5. Select Subnet Mask, and then press the B Button to delete the existing subnet mask.
      6. Enter in the subnet mask as it appears in your network settings, and then select OK.
        • For most networks, the subnet mask is 255.255.255.000.
      7. Select Gateway, and then press the B Button to delete the existing gateway.
      8. Enter in the default gateway as it appears in your network settings, and then select OK.

      For more information, see How to Manually Enter IP Address Settings on Nintendo Switch.

    • How to manually enter IP address settings on Nintendo Switch 2
      On a PC or smart device
      1. Using a device on your network (PC, laptop, smart device, etc.), locate the following network information:
        • IP Address
        • Subnet Mask
        • Gateway
      On the Nintendo Switch 2 console
      1. From the Advanced Settings page of your network connection's settings, select IP Address Settings.
      2. Select ManualIP Address shown in Network in the System Settings on Nintendo Switch 2.
      3. Select IP Address and then hold down the B Button to delete the existing IP address (it defaults to zeroes).
      4. Enter the IP address you found on the network device, but add 20 to the last section of digits, and then select OK.
        • As an example, if your computer's IP address displays as 192.168.2.5, enter 192.168.2.25 on the Nintendo Switch 2.
          Important: Every device on a network must have a different, unique IP address.
      5. Select Subnet Mask, and then press the B Button to delete the existing subnet mask.
      6. Enter in the subnet mask as it appears in your network settings, and then select OK.
        • For most networks, the subnet mask is 255.255.255.000.
      7. Select Gateway, and then press the B Button to delete the existing gateway.
      8. Enter in the default gateway as it appears in your network settings, and then select OK.

      For more information, see How to Manually Enter IP Address Settings on Nintendo Switch 2 and Nintendo Switch.

  • Change the console's IP address setting from "Manual" to "Automatic.

Situation not resolved

Was this helpful?